2024 Toyota Tacoma Oil Filter in Aurora, CO

Yes—the oil filter is replaced with the oil so filtration and flow are restored together.

The filter captures debris the oil carries away; as it loads, a bypass valve can open, sending unfiltered oil through the engine. Replacing the filter at each oil change avoids that quiet loss of protection. Follow the manufacturer’s schedule and your driving conditions to decide timing.

• New, engine‑matched filter installed at every oil change
• Bypass valve risk reduced when the filter isn’t overloaded
• Consistent oil pressure and filtration after service

The old filter is removed, sealing surfaces are renewed, a matched new filter is installed, and the engine is leak‑checked after running.

Technicians clean the filter base, lightly oil the new seal, and ensure the drain plug sealing surface is renewed before refilling with the manufacturer‑specified oil grade. After starting the engine, they inspect for leaks at the filter and drain plug, recheck the level, and reset the maintenance reminder when applicable.

• Old filter removed and mounting base cleaned
• Fresh, engine‑matched filter fitted; seal renewed
• Leak check performed after the engine has run

The filter can load up, trigger the bypass valve, and send unfiltered oil through the engine.

While the engine still receives oil, it doesn’t receive filtered oil, which can accelerate wear over time. Contaminants can circulate, affecting bearings and other precision parts. Replacing the filter with the oil keeps debris capture effective and helps maintain long‑term reliability.

• Bypass valve opens under restriction
• Unfiltered oil circulates, increasing wear risk
• Reduced protection during cold starts and high loads

Yes—the filter is matched to this engine, and filters are not interchangeable across engines.

The 2024 Toyota Tacoma uses a 2.4‑liter, 4‑cylinder engine, and the replacement filter is selected to fit its housing and flow requirements. Using a generic or incorrect filter can compromise sealing, flow, and bypass function. Your service advisor will install a filter that matches this engine without requiring you to identify a part number.

• Correct fit for the 2.4‑liter inline 4‑cylinder
• Proper flow and bypass characteristics maintained
• Reliable sealing to prevent leaks after startup

It can be done, but it’s not recommended because a loaded filter can trigger the bypass and circulate unfiltered oil.

Changing oil while leaving an old filter in place leaves captured debris and restriction in the system. That undermines the benefit of fresh oil and can reduce protection, especially under cold starts or heavy loads. Replacing both together is the simple way to restore flow and filtration.

• Fresh oil plus fresh filter restores full protection
• Reduces bypass valve opening risk
• Better consistency across service intervals

Use our online portal to schedule appointment or call the service team directly.

Booking online lets you choose a time, review available service specials, and note concerns for your 2024 Toyota Tacoma. If you prefer to speak with an advisor, call the store and we’ll help you plan your visit based on your driving and maintenance history.

• Book online via the secure scheduler
• Check available service specials before you come
• Get guidance tailored to your Tacoma and usage