Toyota Grand Highlander Hybrid ABS and Brake Light

On a Toyota Grand Highlander Hybrid, an amber ABS light means the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault, while a red BRAKE light can indicate an applied parking brake, low brake fluid, or a hydraulic fault; normal braking may remain with the ABS light alone, but the wheels can lock during a hard stop, and both lights together or a red light with a soft pedal means the vehicle should not be driven, making prompt diagnosis at Stevinson Toyota East in Aurora, Colorado, important for identifying whether the warning comes from a sensor, fluid level, brake pads, or the hydraulic system.

Stevinson Toyota East helps Toyota Grand Highlander Hybrid drivers in Aurora understand ABS and brake warnings and connect the light to the appropriate inspection.

What the ABS and brake lights mean on a Toyota Grand Highlander Hybrid

The amber ABS light that stays on after startup means the anti-lock system has switched itself off. The most common named cause is a wheel-speed sensor fault; normal braking remains, but the wheels may lock during a hard stop. A red BRAKE light, or a circle with an exclamation point, that remains illuminated after the parking brake is released can mean the parking brake is applied, brake fluid is low, or the hydraulic system has a fault.

Low fluid usually points to worn brake pads or a leak. A soft pedal or pedal travel that feels longer than usual increases the urgency, especially when the red light is on. With both lights illuminated, or with a red light and a soft pedal, the vehicle should not be driven.

What the diagnosis covers at Stevinson Toyota East

The ABS and brake light service begins with a scan of the anti-lock brake module for stored trouble codes. The inspection then tests the wheel-speed sensors, their wiring, and the tone rings to trace an anti-lock warning rather than guessing at the cause.

The brake system review includes brake fluid level and condition, pad wear, and the parking brake switch. These checks help distinguish a sensor concern from low fluid, worn pads, a leak, or a hydraulic fault. Drivers can schedule service at Stevinson Toyota East for a focused ABS and brake inspection.

Booking at Stevinson Toyota East

The visit includes an anti-lock module scan and an inspection of the ABS and brake systems, including sensors, wiring, tone rings, fluid, pads, and the parking brake switch. Drivers can schedule service online or contact Stevinson Toyota East at 720-706-3866. The dealership is located at 444 S Havana St, Aurora, CO 80012.