2024 Toyota Land Cruiser Oil Filter in Aurora, CO

Yes—the oil filter is replaced at every oil change to restore proper filtration and flow.

The filter captures debris the oil carries out of your engine; as it loads, the internal bypass valve can open so oil keeps flowing but no longer gets filtered. Replacing the filter with the oil ensures clean media, correct sealing, and consistent pressure for the next interval. Following the manufacturer’s maintenance schedule and your driving conditions determines the timing.

• Fresh filter restores debris-holding capacity
• Prevents bypass operation during normal driving
• Ensures a proper seal after the new oil is filled

The service includes removing the used filter, installing a correct, engine-matched filter with renewed sealing surfaces, and performing a post-start leak check.

During an oil and filter service, we also drain the old oil, fill the oil grade the manufacturer specifies for this engine, and confirm proper oil pressure after start-up. The gasket is oiled and torqued to ensure a reliable seal in hot and cold conditions. We reset the maintenance reminder and review any notes from our inspection.

• Used filter removed and recycled
• New, matched filter installed and sealed
• Leak check performed after warm-up

The filter can load with debris, trigger the bypass valve, and let unfiltered oil circulate through the engine.

Unfiltered oil still lubricates, but fine particles can reach bearings, cam lobes, and other precision surfaces, quietly accelerating wear over time. You may not notice symptoms immediately; the risk accumulates across thousands of miles. Replacing the filter with each oil change prevents bypass operation in normal use and protects long-term durability.

• Higher wear risk from circulating particles
• Bypass valve opens under restriction
• Protection restored with a fresh filter

Yes—the filter is matched to this engine’s 2.4-liter four-cylinder design, and filters are not interchangeable across engines.

Correct fit ensures the media area, bypass setting, and sealing dimensions align with the Land Cruiser’s lubrication system. Using the wrong filter can compromise flow, sealing, or filtration. We install a filter selected for this exact engine so it performs as intended with the oil grade the manufacturer specifies.

• Engine-matched fit and sealing surfaces
• Correct bypass valve characteristics
• Proper media area for debris loading

It can be done, but it’s not recommended because the loaded filter can send unfiltered oil through the bypass valve.

Skipping the filter leaves old debris trapped in the media and reduces flow margin as miles add up. The bypass valve will protect against starvation, but that means unfiltered oil circulates—a quiet path to increased wear. Replacing both together aligns with the manufacturer’s maintenance approach and restores full protection.

• Prevents bypass operation under load
• Maintains steady oil pressure and flow
• Pairs fresh oil with clean media

Use our online tool to schedule service or call the store for assistance with your 2024 Toyota Land Cruiser.

Pick a time that fits your day, and we’ll handle the rest—from installing the correct filter to performing a leak check after warm-up. Check for current offers before you book. If you prefer to speak with a service advisor, call the number listed on our site.

• Click to schedule appointment
• Review current service specials
• Call us at {{rooftop.phone}}